Function Default factory value Setting range
Temperature control mode: Start 25 ℃ ~ stop 40 ℃ -19 ~ 99 ℃
F1——Intermittent working mode Start 02 minutes ~ stop 10 minutes 01-99 minutes
F2——Timed shutdown mode 00 hours 30 minutes 01 minutes ~ 99 hours 59 minutes
F3——Timed start mode 00 hours 30 minutes 01 minutes ~ 99 hours 59 minutes
Product name: high precision digital temperature controller
Specifications: XH - W1411
Temperature measurement range: 55 ~ + 110 °
Temperature measuring accuracy: plus or minus 0.3 °
Resolution: 0.1 °
Temperature control range: - 19 ~ 99 °
Accuracy: 1 °
Temperature measuring probe: NTC10K/B3950 standard 1 meters waterproof probe
Power supply voltage: DC12V AC220V
Display colors: red, green, blue and yellow (optional)
Applicable environment: - 25 to 55 degrees /20% - 80% (RH)
The output type: 20A relay output
Appearance size: 90 * 60 mm
Hole size: 70 * 50 mm
How to Use:
1. authors product plug screen display temperature on household socket, illustrate the power supply is connected correctly
2. put the temperature probe need to temperature control, according to the need to set the start and stop the temperature
3. the heating or cooling equipment power supply plug on the thermostat outlet temperature control can be realized
After power-on, if the temperature is within the range, you should immediately start the output and make it stop when it reaches the set value.
Start temperature For example, if you want to control water boiling to stop at 60 Celsius degrees and start over at 45 Celsius degrees, then you should set the start value as 45 and stop value as 60.
Start temperature >stop temperature: refrigeration mode
For example, in summer, you want to control the greenhouse to start the scavenger fan when the temperature is higher than 35 Celsius degrees and stop at 32 Celsius degrees, then you should set the start value as 35 and stop value as 32.
SET: function button/power-on & power-off button
In the state of power-on, you can switch off by a long press for 3 seconds. After switched off, it will still remain power-off if there is no power supply.
In the state of power-off, you can switch on by pressing SET once. After switched on, it will still remain power-on if there is no power supply.
In the state of normal temperature control, you can switch between F-1 to F-3 by pressing SET once.
F-1 intermittent work mode unit: minute left: start minute right: stop minute
F-2 time switch left: hour right: minute 99h59mins max
F-3 time switch left: hour right: minute 99h59mins max
Temperature correction: Enter the temperature correction function by removing the controller plug and pressing SET to supply power. The screen displays –00--. You can increase or decrease temperature on the basis of the original temperature, maximum range -9.9~+99. After correction:
Real-time temperature = the temperature before correction + the corrected value
Press (start+-) power-on to enter self-check function; Press (stop+-) power-on to restore factory settings.
Restore the factory:
If there is some setting mistake or setting disorder, you can press the two stop buttons to restore factory settings.
When the screen displays 88-888-88, and the buzz gives out a long sound, it means the restoration has finished.
Default start value is 25, stop 40, F-1 01-10, F2 00-30, F-3 00-30, correction=000
1. no reaction, the screen is not bright
To check whether there is electric socket, can use the same plug of other electric equipment check, if there is a electric check the thermostat, was shut down, according to a SET up
2. the screen can display, but cannot reach the temperature control function
If the temperature is set right, but the start don't start, to stop don't stop it is possible to start and stop the set data error, please to drop down value and stop values
3. the temperature changes control
This controller is a type of control and also start when the red light is bright, the green light to stop time, if the control indicator in the process of change is right, but temperature had rushed explain the thermostat is good, you can reduce your heating/cooling efficiency can be resolved
4. temperature measurement with actual deviation
Among the thermostat display real-time temperature, if you feel that now temperature thermostat for 30 degrees according to 29.6, you can enter the temperature correction, hold down the school SET up temperature can be SET at 0.4, real-time temperature is 31.2, if you think is 30 May fall correction to 1.2 temperature so that you can get what you want
5. other faults and matters not mentioned herein can be with your company
Be sure to carefully read this manual first to use this product
1. this product is a three plugs please socket with ground wire
2. the thermostat host is not waterproof, avoid water, it is forbidden to bring into the bathroom to use or outdoor use
3. the use of power is greater than the product is forbidden nominal power or cause permanent damage and danger
4. the actual temperature control should pay attention to observe whether temperature control is executed correctly before leaving