Only DC include 6pcs rectifier diodes . AC don't need rectifier diodes
Product name: Vertical wind turbine model
Product height: 420mm
Blade length: 250mm
Base diameter: 90mm
Rotation diameter: 220mm
Rated power: 20W
Voltage: 1-20 v
Product weight: about 690g
It adopts three-phase permanent magnet synchronous generator, no carbon brush, and sends out three-phase ALTERNATING current. The bottom outgoing line is three-wire, and the LED can be lit by gently pushing the wind blade. If it needs to be converted into DIRECT current, you can give 6 rectifier diodes and a filter capacitor as a gift.The bottom aluminum alloy bracket with screw holes is convenient for installation and fixation. The blade beam adopts hardware stamping to ensure the strength.
The blade adopts PVC popular design, high conversion efficiency, corrosion resistance, uv resistance, generator shaft fixed with flange, to ensure accuracy and level, the rest of the parts using 3D printing manufacturing.Really do the breeze start.It can be used for interior decoration, scientific experiment and model making.The height of the whole machine is 420mm, the distance from the edge of the fan blade to the axis is 105mm, the rotating diameter is 220mm, and the length of the blade is 250mm.
Because the size is too large, it is not convenient to pack, the blades are unpacked and shipped, after receiving the goods, you can directly twist the screws.
6. Blade (PVC material).
Note that there are two small Kimi screws at the flange of Figure 4, which must be tightened, or they will be idling when rotating!